What resins should I use?

Currently, the models are pre-sliced and compatible only with Aqua-Gray 8K resin and Aqua-Gray 4K resin depending on the printer. The 8K printers (Sonic Mini 8K and Sonic Mighty 8K) can only print with Aqua-Gray 8K resin, while the 4K printers (Sonic Mini 4K and Sonic Mighty 4K) can only print with Aqua-Gray 4K resin.

If you would like to use other Phrozen resins, please adjust the parameters on the printer's touch panel through the following steps:

1. Once you are ready to print, click the TOOLS icon.
2. Click on the parameters and dial the recommended layer exposure time and light-off delay according to the resin profile sheet.
3. For the parameters setting adjustment, please refer to the Phrozen Resin Profile. 

If you would like to use a third-party resin, please do the following: 

1. Confirm that the resin should also be cured under 405 nm UV lights.
2. Click the TOOLS icon.
3. Click on the parameters and dial in the recommended layer exposure time and light-off delay for the resin.

Please contact our support team if you have trouble setting up the resin.